Force Global Impulse Heat Sealing Technologies and Solutons
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
RES Background

ROPEX DIN-rail and Front Mount Controllers:

Force Global - ROPEX America, direct sales and support for End-users, OEMs, and Distributors. Offering the complete range of Ropex Resistron controllers, consumables, and componenets to support your existing equipment repairs, upgrades, and new system development. We provide leading German engineered heat-sealing technology using closed-loop resistance control.

This allows our customers the many benefits of sensorless, temperature controlled heat-sealing and enables manipulation of heat sealable materials per your requirement.

Ropex Resistron RES-5010 Heatseal Controller

Pictured: ROPEX Resistron RES-5010 Impulse Heat Seal Controller

PTFE Cover-Strip, for Maximum Heat Seal Band Performance and Life:

mm (inch)
Ropex Cover Strip
Specifications / Remarks
0.08 (0.003)
Temperature stability:
up to 200°C
silicone adhesive thickness
approximately 0.05 mm
Store in a cool dry place:
Optimum storage temperature
20°C +/-5, humidity 45 to 75%
PTFE Tape = AP-08-CS-40-12  (AP = Silicone Adhesive, 0.08 mm thick, CS = Cover-Strip
40.0 mm overall width with a 12 mm non-adhesive free zone)

Specifications & dimensions subject to change.

Ropex Heat Seal System Consumables:

PTFE Cover-Strip with a non-adhesive free zone enables the heat seal band to freely expand and contract, without damaging or creasing the covering glass fabric.

We can also provide custom tapes, slit to your dimensions, to suit your application.

PTFE Cover-Strip maximizes your heat seal band life. The heat seal band is free to expand and contract minimizing thermal and mechanical stresses.

Tip: To improve adhesion and maintain tape location ... fasten PTFE tape in position with 25 mm wide masking tape (apply tape to bar sides only).

  • PTFE Cover-Strip minimizes the thermal barrier between the heat seal band and heat sealable substrate.

  • PTFE Cover-Strip enables lower heat seal temperatures.

  • PTFE Cover-Strip promotes maximum heat transfer (heating and cooling).

  • Adhesive backed for easy installation, heat resistant up to 200°C.

Ordering information:

PTFE Cover-Strip Tapes ... In-stock (custom sizes also available)

  • Part No. 100733 (PTFE Heat Seal Band Cover-Strip, with adhesive free zone).
    PTFE Cover-Strip
    AP-08-CS, Roll = 30 m
    40.0 mm (Width) x 0.08 mm (Thickness) x 30 m (Length)
    12 mm Non-Adhesive Zone

  • Part No. 101501 (PTFE Heat Seal Band Cover-Strip, with adhesive free zone).
    PTFE Cover-Strip
    AP-08-CS, Roll = 30 m
    45.0 mm (Width) x 0.08 mm (Thickness) x 30 m (Length)
    17 mm Non-Adhesive Zone


P: 414 507-9378
F: 262 628-4451


Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials