ROPEX High Voltage Load Resistor (RV)
Heat Seal Controller Accessories:
Ropex RES/CIRUS temperature controllers are designed for flexible implementation into a large number of standard applications. The required secondary voltages and currents can be set within a wide range. If due to the length of the heatsealing band - the required secondary voltage (U2 or UR) is higher than the maximum permissible voltage of the controller, an RV-xxxx-1 series resistor must be used.
Note: refer to Ropex Application Report for installation instructions.
- For Resistron and Cirus applications.
Ropex RV-xxxx-1:
RV Technical Data:
ROPEX Models and Part Numbers:
Series Resistor RV xxxx-1...
-
RV-300V-1 (Electrical circuit): Part No. 886200
-
RV-03K3-1 (Resistance 3.3 kohms): Part No. 886203
-
RV-33K2-1 (Resistance 33.2 kohms): Part No. 886202
-
RV-100K-1 (Resistance 100 kohms): Part No. 886201