ROPEX Resistron Front Mount Controllers and Features:
 |
|||||||
 |
Force Global offers a large range of Ropex RES Front Mount Controllers for convenient thru panel mounting. Also available for this line of controllers: Flexible soft protective cover, Part No. 887000. Hard hinged lockable protective cover, Part No. 887101. For internal enclosure installation, DIN-rail mounting, HS-Adapter Part No. 887001. click the "controller image" to view RES Din-rail Mount Controllers and Features |
||||||
Voltages |
Front Panel Mount 400 Series Part Numbers LC Display (green) fixed back light |
||||||
115VAC 230VAC 400VAC |
- 700322 - |
741511 741512 741513 |
742011 742012 742013 |
743011 743012 743013 |
744011 744012 744013 |
744511 744512 744513 |
740841 740832 740843 |
Voltages |
Front Panel Mount 400 Series Part Numbers VF Display (blue) variable back light |
||||||
115VAC 230VAC 400VAC |
741521 741522 741523 |
742021 742022 742023 |
743021 743022 743023 |
744021 744022 744023 |
744521 744522 744523 |
||
Operating instructions |
RES-004  |
RES-415 |
RES-420 |
RES-430 |
RES-440 |
RES-445 |
RES-408 |
Application & Features |
Low cost |
Basic Menu |
Standard |
Secondary control low cost |
Timer functions + preheat |
Timer functions + preheat |
Plug-in Terminal |
Temperature selection (Set-point) |
Display |
Display |
Display |
Display |
Display |
Display or Isolated 0...10VDC input |
via Terminal |
Temperature output (Actual-temp) |
- |
- |
- |
Display or 0...10VDC ATR-x |
Display or 0...10VDC ATR-x |
Display or Isolated 0...10VDC output |
Terminal or ATR-x |
Automatic zero calibration (Autocal) |
Keypad |
Keypad |
Display |
Display |
Display |
Display or Isolated 24VDC signal |
via Terminal |
Start (Heat) |
Contact |
Contact or Isolated 24VDC signal |
Contact or Isolated 24VDC signal |
Contact |
Contact or Isolated 24VDC signal |
Contact or Isolated 24VDC signal |
Isolated 24VDC signal |
Preheat |
- |
- |
- |
- |
Contact or Isolated 24VDC signal |
Contact or Isolated 24VDC signal |
Isolated 24VDC signal |
Cooling |
X |
- |
- |
Time or Temp. |
Time or Temp. |
Time or Temp. |
- |
Reset |
- |
Keypad |
Keypad |
Keypad |
Keypad |
Keypad or Isolated 24VDC signal |
via Terminal |
Configurable Relay K1 O/P NO or NC |
- |
- |
- |
X |
e.g. "cycle end" |
e.g. "cycle end" |
- |
Output-1 |
- |
- |
- |
- |
"Temp OK" |
"Temp OK" |
- |
Automatic line frequency adjustment 47 - 63 Hz |
- |
X |
X |
X |
X |
X |
X |
Automatic optimization (Autotune) |
- |
X |
X |
X |
X |
X |
X |
Automatic sec. V + A configuration (Autorange) |
- |
as of Rev. 100 |
as of Rev. 100 |
- |
as of Rev. 100 |
as of Rev. 100 |
as of May-2005 |
Automatic phase angle compensation (Autocomp) |
- |
- |
as of Rev. 100 |
as of Rev. 100 |
as of Rev. 100 |
as of Rev. 100 |
as of Jun-2006 |
Alarm Signal |
Display |
Display |
Display |
Display |
Display |
Display |
Terminal |
Diagnostics |
X |
X |
X |
X |
X |
X |
X |
Diagnos-port CI-USB-1 Free... Vis-software |
- |
RES-Vis* as of Rev. 100 |
RES-Vis* as of Rev. 100 |
- |
RES-Vis* as of Rev. 100 |
RES-Vis* as of Rev. 100 |
RES-Vis* as of Jun-2006 |
Alarm output terminal |
- |
X |
X |
- |
X |
X |
X |
Alarm output NO or NC |
- |
X |
X |
- |
X |
X |
X |
Selectable heatseal band temperature range |
0...250°C |
0...200°C 0...300°C 0...400°C or 0...500°C RES-Vis* Rev. 100 |
0...200°C 0...300°C 0...400°C or 0...500°C as of Rev. 100 |
0...300°C |
0...200°C 0...300°C 0...400°C or 0...500°C as of Rev. 100 |
0...200°C 0...300°C 0...400°C or 0...500°C as of Rev. 100 |
0...200°C 0...300°C 0...400°C or 0...500°C RES-Vis* Feb-2007 |
Selectable heatseal band alloys |
(Alloy-L) A20L |
(Alloy-20) A20 |
(Alloy-20) A20, A20L Low-Ex |
(Alloy-20) A20 |
(Alloy-20) A20, A20L Low-Ex |
(Alloy-20) A20, A20L Low-Ex |
(Alloy-20) A20, A20L Low-Ex RES-Vis* Jun-2006 |
Variable temp coefficient range (ppm) |
- |
RES-Vis* Rev. 100 |
as of Rev. 100 |
- |
as of Rev. 100 |
as of Rev. 100 |
RES-Vis* |
Low Voltage amplifier MOD 01 |
- |
- |
- |
- |
- |
- |
- |
Booster terminal MOD 26 |
- |
X |
X |
- |
X |
X |
O |
Temperature OK signal MOD 40 |
- |
- |
- |
- |
- |
- |
- |
( PD-x ) = Potentiometer, see controller accessories.
( ATR-x ) = Temperature meter, see controller accessories.
( X ) = Standard
( O ) = Optional modification
( - ) = Not available
( RES-Vis* )
The temperature range and temperature coefficient settings can also be specified by means of the Ropex Visualization Software + USB Vis-com Cable (Vis-Link).
ForceGlobal reserves the right to modifications and supplements.
This web page is the property of Force Global LLC and may not be reproduced in whole or part, nor used for any purpose without the written consent of Force Global LLC. |