ROPEX RES-440 Resistron:

RES-440 | In-stock USA

The ROPEX Resistron RES-440 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-440 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

• Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

• Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

• Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

• Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

• Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

• 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-440 contains the following features:

ROPEX RES-440 Features:

• µC-Technology

• LC (green) or VF (blue)
  Display(Vacuum-Fluorescent)
  4 lines, 20-characters

• Automatic zero calibration (AUTOCAL)

• Automatic optimization (AUTOTUNE)

• Automatic frequency adjustment

• Large current and voltage range

• Automatic configuration of secondary voltage and current ranges
  (AUTORANGE, as of software revision 100)

• Automatic phase angle compensation
  (AUTOCOMP, as of software revision 100)

• Booster terminal (MOD 26) as standard

• Time control, for heat sealing time and cooling time settings

• Preheating

• Alarm function with fault diagnostics

• Configurable relay output (e.g. "end of cycle")

• Cooling controlled by time or temperature

• Output for "set-value achieved"

• Analog temperature output 0-10VDC
  for ACTUAL temperature

• Selectable temperature range (0...300°C, 0...500°C)

• Selectable heatseal band alloy (A20 (Alloy-20), A20L, Low-Ex)




RES-440 Operating Instructions:

ROPEX RES-440 Resistron Part Numbers:

Ropex part numbers for RES-440- _  / _ VAC

• RES-440-L/115: LC-Display, Line voltage. 115VAC Part No. 744011

• RES-440-L/230: LC-Display, Line voltage. 230VAC Part No. 744012

• RES-440-L/400: LC-Display, Line voltage. 400VAC Part No. 744013

• RES-440-V/115: VF-Display, Line voltage. 115VAC Part No. 744021

• RES-440-V/230: VF-Display, Line voltage. 230VAC Part No. 744022

• RES-440-V/400: VF-Display, Line voltage. 400VAC Part No. 744023

• Alternate industry names for Ropex Resistron RES-440 controllers:

• RES-440, RES440, RES_440, res-440, res440, res_440

ROPEX RES-440 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories:

... available for the Ropex Resistron Heatseal Controllers:

• Current transformer: PEX-W3, PEX-W4

• Current transformer high busbar: HCB

• Line filter: LF-06480, LF-35480

• Booster: B-075400, B100400

• Temperature display, temperature meter: ATR-3, ATR-5

• Temperature adjustment, potentiometer : PD-3, PD-5

• Heatseal power transformer: PTR, TR-x

• Supervising fault current transformer: MSW

• Communication interface: CI-USB-1

• Temperature Sensor: TS-1

• Twisted Cable (RES voltage measurement cable): CI-USB-1

• High Current Cable (RES current load cables): C-TC