ROPEX RES-430 Resistron:
RES-430 | USA
The ROPEX Resistron RES-430 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-430 is designed for simple plug-in system integration.
The ROPEX Resistron RES-430 contains the following features:
ROPEX RES-430 Features:
-
µC-Technology
-
LC (green) Display
4 lines, 20-characters -
Automatic zero calibration (AUTOCAL)
-
Automatic optimization (AUTOTUNE)
-
Automatic frequency adjustment
-
Secondary control
-
Time control, for heat sealing time and cooling time settings
-
Configurable relay output (e.g. "end of cycle")
-
Time or temperature controlled cooling phase
-
0...10 VDC analog output for ACTUAL temperature
-
Load cell interface for monitoring closing pressure
-
Serial data interface (optional)
-
Automatic configuration of secondary voltage and current ranges
(AUTORANGE, as of software revision 100) -
Automatic phase angle compensation
(AUTOCOMP, as of software revision 100) -
Fault diagnostics
-
Selectable temperature range (0...300°C, 0...500°C)
-
Selectable heatseal band alloy (A20 (Alloy-20), A20L, Low-Ex)
RES-430 Operating Instructions:
For additional downloads, please visit ropex-group.com ... or click here to add Ropex tab
ROPEX RES-430 Resistron Part Numbers:
Part numbers for RES-430- _ / _ VAC
-
RES-430-L/115: LC-Display, Line voltage. 115 VAC Part No. 743001
-
RES-430-L /230: LC-Display, Line voltage. 230 VAC Part No. 743002
-
Alternate industry names for RES-430 controllers:
- RES-430, RES430, RES_430, res-430, res430, res_430
ROPEX Accessories:
... available for the Ropex Resistron Heatseal Controllers: