ROPEX High Current Load Resistor (RB)
Heat Seal Controller Accessories:
Ropex RES/CIRUS temperature controllers are designed for flexible implementation into a large number of standard applications. The required secondary voltages and currents can be set within a wide range. An additional RB-xxxx-1 load resistor must be connected parallel to the current transformer in applications where the current of the heatsealing band is higher than the maximum permissible current of the controller.
Note: refer to Ropex Application Report for installation instructions.
- For Resistron and Cirus applications.
Ropex RB-xxxx-1:
RB Technical Data:
ROPEX Models and Part Numbers:
Load Resistor RB xxxx-1...
-
RB-01R7-1 (Resistance 1.7 ohms): Part No. 886103
-
RB-04R5-1 (Resistance 4.5 ohms): Part No. 886102
-
RB-09R0-1 (Resistance 9.0 ohms): Part No. 886101
-
RB-16R6-1 (Resistance 16.6 ohms): Part No. 886104