PTFE (SA) Tape for Silicone Jaw/Bar Covering and Heat Seal Band Insulation Backing Enhancement:
Type
|
Thickness mm (inch) |
![]() |
Specifications / Remarks |
SA-08 |
0.08 (0.003) |
Temperature stability: up to 200°C |
|
SA-13
|
0.13 (0.005) |
Silicone adhesive thickness approximately 0.05 mm |
|
SA-15
|
0.15 (0.006) |
Store in a cool dry place: |
|
SA-25
|
0.25 (0.010) |
Optimum storage temperature 20°C +/-5, humidity 45 to 75% |
|
PTFE Tape specification format: SA-08S-15 SA = Self adhesive 08S = 0.08 mm Fabric thickness + adhesive backing (S = Silicone) (A = Acrylic ) 15 = 15.0 mm Overall width |
Specifications and dimensions subject to change.
ROPEX Heat Seal Bar Consumables:
PTFE coated glass fabric tapes are available in a range of in-stock sizes. We can also provide custom tapes, slit to your dimensions, to suit your application.
Apply PTFE tape to heat seal band backing insulation to enable the heat seal band to more freely expand, this will also prolong backing life and enhance insulation properties.
Tip: To improve adhesion and maintain tape location ... fasten PTFE tape in position with 25 mm wide masking tape (apply tape to bar sides only).
-
PTFE Tape - for opposed heat seal jaw/bar silicone covering.
-
Aids in holding opposed jaw bar silicone in position.
-
PTFE Tape - for Bar-Insul and heat seal band insulation enhancement.
-
For hard opposed jaw bar covering in heat seal and cut applications.
-
Adhesive backed for easy installation, heat resistant up to 200°C.
Ordering information:
PTFE Tapes ... In-stock (custom sizes also available)
-
Part No. 102305 (Used as a protective covering over heat seal band insulation backing materials when applied to the heat seal jaw bar).
PTFE TAPE
SA-15S-15, Roll = 30 m
15.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
Adhesive Backed -
Part No. 101414 (Used as a protective covering over heat seal band insulation backing materials when applied to the heat seal jaw bar).
PTFE TAPE
SA-15S-19, Roll = 30 m
19.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
Adhesive Backed -
Part No. 101415 (Used as a protective covering over silicone facing or Sil-Glass hard face insulation when applied to the opposed heat seal jaw bar).
PTFE TAPE
SA-15S-40, Roll = 30 m
40.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
Adhesive Backed -
Part No. 100892 (Used as a protective covering over silicone facing or Sil-Glass hard face insulation when applied to the opposed heat seal jaw bar).
PTFE TAPE
SA-15S-45, Roll = 30 m
45.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
Adhesive Backed