Heat Seal Bar-C with Silicone Insulation Backing:
Bar (C)
|
Step by Step Consumables Assembly Guide. |
Bill of Materials: |
![]() |
Step #1 |
Bar width = 19.0 mm (0.75") |
![]() |
Step #2
Apply Silicone jaw bar facing insulation. This wiil compensate for irregular substrates and uneven heat sealing surfaces. |
Part No. 100030 |
![]() |
Step #3
Apply PTFE tape over the Silicone jaw bar facing insulation. This will prolong the Silion life, and enable the heat seal band to freely expand and contract. |
Part No. 101414 PTFE TAPE SA-15, Roll = 30 m 19.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length) Adhesive Backed |
![]() |
Step #4
Install heat seal band. |
- |
![]() |
Step #5
Apply PTFE Cover Strip, the adhesive free zone will enable the heat seal band to freely expand and contract. |
Part No. 101501 PTFE Cover-Strip AP-08-CS, Roll = 30 m 45.0 mm (Width) x 0.08 mm (Thickness) x 30 m (Length) Adhesive Backed |
![]() |
Step #6
Optional ... apply masking tape to PTFE Cover-Strip sides to aid with adhesion. |
- |
This information is provided as a guide to illustrate some of the various heat seal bar configurations that are possible with components and consumables Force Global offer. |